posts by tags "Impaction pin Nozzle"

Seminar of “Introduction of Gas Turbine Inlet Air Cooling systems” at Monenco Iran co.

Seminar of “Introduction of Gas Turbine Inlet Air Cooling systems” at Monenco Iran co.

Nov.2017, Seminar of ” Introduction of Gas Turbine Inlet Air Cooling systems” held at Monenco Iran Consulting Engineers co.  by Rahavard Energy. In this seminar, different methods of GT Inlet Air Cooling (GTIAC) described by Rahavard Energy’s Technical team, focusing on Evaporative methods. Then, APINA’s Technical Managers described  the theory of Refregirative cooling systems and  […]

More ...
Turbine Inlet Air Cooling

Turbine Inlet Air Cooling

 Turbine Inlet Air Cooling Technologies (TIAC) Gas turbines output power decreases with respect to ISO design condition when ambient temperature rises significantly. The results show reductions of power to be about 0.5-0.9, due to each °C ambient air temperature growth. On the other hand, demand for electric power and the value of electricity are greatest at […]

More ...
High Pressure Fogging

High Pressure Fogging

High pressure Fog cooling is a method of inlet cooling where demineralized water is converted into fine fog droplets by means of specially designed atomizing nozzles operating at pressures between, 70 to 150 barg . As the fog evaporates in the intake duct, it cools the air. This technique can achieve close to 100% evaporative […]

More ...
Brochure

Brochure

Download our brochure on Gas Turbine Inlet Air Cooling (GTIAC) technologies:

More ...